We specialize in hard to find, short run, custom-milled eastern white pine.
We have manydifferent patterns, grades widths and
thicknesses along with dry, rough pine and eastern hemlock.

We air dry our wood 60+ days to equalize the moisture content and stresses in the
wood before kiln drying in our low temperature dehumidification kilns. Lumber
dried this way uses up to 50% less energy. The weathered ends means you get
the full length of the lumber plus an extra inch or so to allow for those applications where
the extra length is critical. We also better utilize the trees (and the natural resource)
by sawing a smaller diameter and shorter length log
than most other lumber manufacturers.

We utilize approximately 25% more
of the timber resource off the land.



In the mill, thin kerf band saws are used to reduce
sawdust and to realize more lumber yield from the log.
All by-products are used for animal bedding, landscaping
mulch or fiber for paper products. No chemicals are
used to prohibit stain or to keep the lumber bright.

Seacoast Mills, Inc. is a member of
the Northeastern Lumber Manufacturers
Association. NeLMA



We specialize in eastern white pine and other northeastern
woods and can produce additional grades within the
standard NeLMA grades.
Barn Restorations & Colonial Restorations
We saw thick planks, stair treads, wide pine flooring 12-18" in random lengths and occasionally even wider (knotty pine or select), wide pine wainscotting, 2" select boards, 5/4" select boards, beams, posts, sills, rough boards and wood ceilings.

Custom specs
We will manufacture to your specifications...
even small quantities. Please allow us lead time and we may need to apply a set-up charge.

Well-known buildings we have supplied.
Observation Building on Mt. Washington. LL Bean Store in Freeport, Maine Anheuser-Busch Brewery in Merrimack, NH Grand Ole Opry in Nashville, TN
Click Here For More
Seacoast Mills Photos
Copyright © 2008 - Seacoast Mills Building Supply & LTD Company, Inc.